You can create the Bp-d plot using the open water data. You only need a small part near the area of interest for your design. There is not really much point, obviously the data is the same as the open water test data.
I don't think that many people use the Bp-d charts any more since computers have made it so fast and easy to perform calculations. There is regression data for the series and even lifting line and lifting surface calculations run in less time than it takes to hit the <enter> key.
A long time ago it helped to make a good starting guess to reduce iterations and save a lot of time and effort. Now you can just start with 1 and iterate until the optimal solution is found and it still only takes a fraction of a second!