Twin I/O to Twin Outboard Conversion Project

Thanks for that, I don't keep up with gadgets much any more, but that one is a good idea as standard centrifugal pumps can leave quite a bit behind. Hopefully your bilges will be drier and cleaner now you've removed the cast iron ballast.

The boat in its original for did not have a garboard plug . . . which was very strange. With the conversion to outboards, I made sure to have a garboard plug, and now I can have the boat drain during the off-season.

Another nice thing that I picked up in the conversion is an ignition kill lanyard. The boat had no lanyard/kill switch before, which seemed 'non-compliant' :rolleyes: . The Honda rigging has the kill switch/lanyard, whereas the Mercruiser rigging did not.
 
I made winter covers for the engines, using some material that I have on-hand from my boat upholstery business. I also pumped a couple gallons of -75˚F PG antifreeze through the engines just in case any of the plastic parts along the cooling path do not fully drain. The engines are 'put to bed' for the winter.
.

IMG_0469.webp

.
 
Kill switch is a solid tool. Admittedly have very few boats with them, almost had an incidence a few years ago and definitely see the utility of them.

Covers look nice.

Boat upholstery business you say... hmm there is a thread tangent for the ages... I'll keep it at a single question. Got the wife a consew and turned here 3 generations of insane quilting loose on upholstery for both our boat and camper. The covers turned out amazing, but she used local foam from a local big box and its possibly less comfortable than nothing. Since shipping is a pita for anything up here. I'd like to get good stuff ordered and not have to do it again for a while. Need 3 and 4 inch thick for dinette, and some other seats. Open to brand names or search terms to use when sourcing a good foam.
 
Kill switch is a solid tool. Admittedly have very few boats with them, almost had an incidence a few years ago and definitely see the utility of them.

Covers look nice.

Boat upholstery business you say... hmm there is a thread tangent for the ages... I'll keep it at a single question. Got the wife a consew and turned here 3 generations of insane quilting loose on upholstery for both our boat and camper. The covers turned out amazing, but she used local foam from a local big box and its possibly less comfortable than nothing. Since shipping is a pita for anything up here. I'd like to get good stuff ordered and not have to do it again for a while. Need 3 and 4 inch thick for dinette, and some other seats. Open to brand names or search terms to use when sourcing a good foam.

You need the high density foam for cushions . . . else the cushion will feel like nothing, and you will bottom out when you sit on it. Sometimes you can mix a high density on the bottom and a medium density on the top, making a 2-layer cushion. Sailrite.com is a go-to source, but not always the best prices. I also get materials from 'Albrights.com' and 'A1foam.com'.

My business website ( currently idle as I am taking a year off )
accoladeboatworks.com

Here are a few things I have done for customers . . .
516749994_24949718451285328_2678067302773501283_n.webp

.
515757359_24949718481285325_5151374358087276790_n.webp

.
861745474_29994575493466240_1716404108255423442_n.webp

.
504079629_24663637949893381_499017821070472389_n.webp

.
 
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making any potentially dangerous or financial decision, always employ and consult appropriate professionals. Your circumstances or experience may be different.

  • Back
    Top