Trailer sailer anchor chain setup

TANSL, I concur.

The Capt, boat, and crew all do the best they can, under the circumstances they find themselves in.

( There are no atheists in a storm. )
 
On the original question, if you can haul up 2m (6 feet) of 8mm chain, and the anchor, go for it, and forget the 6mm chain; if you can't, then you probably won't be able to haul up 6m of 6mm chain and the anchor anyway, if the water is 6m deep. Then get a winch.

To be blunt if someone can't pull up 6m of 6mm chain then they are probably not fit enough to be sailing much.

If weight is a consideration and the money is available I would certainly go for one of the modern anchors instead of something like a CQR or standard Danforth type. We changed our CQR and trademark Danforth after the latter broke a weld at 3 am in a small anchorage, which was extremely unpleasant. We now had a Sarca Excel and a Fortress, and we're amazed at how superior they are to the old designs. For a TY I'd be tempted to go for a Fortress due to its amazing weight/power combination, although it does have the occasional issues inherent in the style of design in some conditions.

The first time we used the Fortress was when I dropped it over the side while anchored, as a test. It was holding very well with the rode about 30 degrees from the vertical, in clear sand. Amazing.
 
I think that if you are on a dingy and a storm is coming, the sensible response is to beach the boat and only use the anchor to keep it from flying away.
 
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making any potentially dangerous or financial decision, always employ and consult appropriate professionals. Your circumstances or experience may be different.

  • Back
    Top