philSweet
Senior Member
- Joined
- May 2, 2008
- Posts
- 3,021
- Reaction score
- 724
- Location
- Beaufort, SC and H'ville, NC
One other point about headstay sag. The effect of increasing headstay sag is to reduce twist in the headsail. During a gust, the apparent wind increases in strength and shifts towards the beam. It's important that the rig as a whole spills air automatically across all conceivable sail plans. You don't want the jib to flatten. Now if you have a high-cut jib, you can still manage the sail shape, but with high aspect jibs and short sheet leads, you can only make the jib's leach stretch out more than it's head in order to twist off the sail.
This is one of the reasons I have put wire luffs and an effective adjustable downhaul in all headsails that aren't a full hoist. I can fly them at different heights, and I can tension them for harsh conditions (high twist control) and run them slack for stable conditions (low twist, not worried about gust response). I have done this on jibs from 16 to 500 sqft.
Headstay tension (rig tension in general) is a very basic decision that has to be baked in to the hull structural design and has a huge impact on cost and structural weight for smaller craft. Once you start looking at a 10 ton cruiser (say a 40'er) the strength and cost issues of rig tension become a smaller percentage of design worries and production costs. But the point that must be kept in mind is suitability for the intended purpose regarding the crew effort needed to sail well and the degree of gust tolerance that the rig should handle without crew intervention. You also need enough tension for any furlers to function smoothly when trying to furl as you bash your way in through a cut with outgoing tide (think Hell's Gate, Haulover Inlet, or Stiltsville channel.)
The Route du Rhumb has had three capsizes among multihulls in the first 3 days of the race - a classic ORMA (Joyon), a Maxi (LeCeach), and an Ocean Fifty (Perraut). Conditions have been anything but stable, but wind speeds weren't all that high. Gust tolerance is the first thing that gets sacrificed when structural weight gets stripped out of these race boats. Cruisers are expected to be durable, say fifty years hull life. That alone gets you enough hull material to support a decent rig tension. My 38'er ran about 5000 pounds on the headstay at the dock on a 57' stick. Jib sheet tension was similar even when just banging about in the bay. No problem with the jib twisting off in a gust, and I could heel to 35 degrees and just ride stuff out. Matching the performance, ease of handling, and the gust tolerance in a multihull is not easy.
This is one of the reasons I have put wire luffs and an effective adjustable downhaul in all headsails that aren't a full hoist. I can fly them at different heights, and I can tension them for harsh conditions (high twist control) and run them slack for stable conditions (low twist, not worried about gust response). I have done this on jibs from 16 to 500 sqft.
Headstay tension (rig tension in general) is a very basic decision that has to be baked in to the hull structural design and has a huge impact on cost and structural weight for smaller craft. Once you start looking at a 10 ton cruiser (say a 40'er) the strength and cost issues of rig tension become a smaller percentage of design worries and production costs. But the point that must be kept in mind is suitability for the intended purpose regarding the crew effort needed to sail well and the degree of gust tolerance that the rig should handle without crew intervention. You also need enough tension for any furlers to function smoothly when trying to furl as you bash your way in through a cut with outgoing tide (think Hell's Gate, Haulover Inlet, or Stiltsville channel.)
The Route du Rhumb has had three capsizes among multihulls in the first 3 days of the race - a classic ORMA (Joyon), a Maxi (LeCeach), and an Ocean Fifty (Perraut). Conditions have been anything but stable, but wind speeds weren't all that high. Gust tolerance is the first thing that gets sacrificed when structural weight gets stripped out of these race boats. Cruisers are expected to be durable, say fifty years hull life. That alone gets you enough hull material to support a decent rig tension. My 38'er ran about 5000 pounds on the headstay at the dock on a 57' stick. Jib sheet tension was similar even when just banging about in the bay. No problem with the jib twisting off in a gust, and I could heel to 35 degrees and just ride stuff out. Matching the performance, ease of handling, and the gust tolerance in a multihull is not easy.