Hi
Late to the party . . . Post some more pictures when you can. Your investigation seems to have led you along the proper path by replacing the wet/rotted bulkheads and stringers.
Hi tpenfield, you are so right!
Yeah the vaccum pump process was a learning curve. Heres a few pics. I made a seal at the base using silicone in a mold (let it dry for a week).
Up to that point getting a good seal to vac was the challenge. It did indeed pump a fair bit of moisture out however after I made the decision to remove and replace the stringers it became apparent as to the extent of the problem.
When you own the boat everything in you wants to believe that your case is somehow better. Someone in this forum said that ‘when it comes to rot it’s always worse than you think.‘ so true.
my plan was to try to evac the moisture and use something like west system to strengthen.
When I pulled it apart in some cases the wood was just damp and weak. In other areas it was crumbly powder. Had I persued my original plan I would have ended up with a weak (non structural), heavy, expensive outcome.
Replacing the stringers was more work but stronger, lighter and now gives me confidence that it’s right.
Honestly what I hate is that the boat looks no different on the outside for all that work

.