jet drive identification please

Discussion in 'Jet Drives' started by Casey Maggee, Sep 10, 2019.

  1. Casey Maggee
    Joined: Sep 2019
    Posts: 2
    Likes: 0, Points: 1
    Location: knoiwsley victoria

    Casey Maggee New Member

    hey all great site here plenty of info , hoping i can get someone who can id this jet drive, its in a 15-16foot bond-wood boat ive purchased, i assume its going to be a aussie built boat as it has a falcon 250 pre-crossflow engine and a rolco engine mount/bell-housing kit,

    keen to find out what the jet drive its as its currently disassembled to repair a dodgy reverse gate i may as well give it a freshen up if i can get parts for it while its 1/2 pulled apart

    cheers

    70640299_483991272424215_8185006866334482432_n.jpg 70254188_900589370303004_3653546434654896128_n.jpg 70606184_374163516855333_8708113404583215104_n.jpg 70381678_383526885655962_2497327576280727552_n.jpg 69583344_2463318220654310_1759335410372182016_n.jpg
     

    Attached Files:

  2. BlueBell
    Joined: May 2017
    Posts: 2,685
    Likes: 961, Points: 113
    Location: Victoria BC Canada

    BlueBell . . . _ _ _ . . . _ _ _

    Welcome to the Forum.

    Any sense of scale?
    Measurements?
     
  3. Casey Maggee
    Joined: Sep 2019
    Posts: 2
    Likes: 0, Points: 1
    Location: knoiwsley victoria

    Casey Maggee New Member

    need anything else let me know
    100mm outlet,
    150mm at the middle,
    175mm( roughly) at the transom
    190mm from transom to where its taken apart
     

    Attached Files:

Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.