Niklas Munk
New Member
- Joined
- Dec 12, 2022
- Posts
- 3
- Reaction score
- 1
- Location
- Denmark
Hi,
After lurking for some time I have finally mustered the courage to post a question to the forum.
We are currently designing a (low)- power outrigger boat project, and are a little unsure in figuring out the design of the arms.
Overall dimensions:
It is not the biggest boat with 20' LOA.
The main hull is ~ 2.3 m beam and 6.3 m // 20' length
Side hull is 0.73 m // 2.6' beam and 5.65 m // 18' length
Weight distribution :
Total disp. is ~3300 kg
Main hull is 2250 kg
Side hull 450 kg
Cockpit at ~500 kg
and arms 100-200 kg
The boat is designed to be a slow disp. boat with crusing speed of ~4 kn.
It should cross big oceans, but be capable of offshore sailing - somewhere around category B.
we are not in a hurry, but the boat needs to be rugged enough to survive the trip.
Between the two hulls, a cockpit shell is suspended, attached to the arms.
Right now we are working with two options - either a steel truss beam or a composite beam with a more custom shape.
We imagine the loads on the beams will be quite high, but it has recently been pointed out to us, that many bigger boats with sails etc. (ie. dragonfly tri) have rather small beams with hinged attachment- in this case we don't even have a sail, which should reduce some of the expected righting loads, but to be honest, I am a little unsure on how big forces we can expect from the boat being tossed around in bigger waves.
Another point is the rigidity - For a truss system i would be a very stiff connection, whereas with composite beam it could probably flex more?
Do any of you have suggestions for either beam type, shape, expected loads, or maybe you can give us a direction for how to approach verification of the beam design?
All help is appreciated.
After lurking for some time I have finally mustered the courage to post a question to the forum.
We are currently designing a (low)- power outrigger boat project, and are a little unsure in figuring out the design of the arms.
Overall dimensions:
It is not the biggest boat with 20' LOA.
The main hull is ~ 2.3 m beam and 6.3 m // 20' length
Side hull is 0.73 m // 2.6' beam and 5.65 m // 18' length
Weight distribution :
Total disp. is ~3300 kg
Main hull is 2250 kg
Side hull 450 kg
Cockpit at ~500 kg
and arms 100-200 kg
The boat is designed to be a slow disp. boat with crusing speed of ~4 kn.
It should cross big oceans, but be capable of offshore sailing - somewhere around category B.
we are not in a hurry, but the boat needs to be rugged enough to survive the trip.
Between the two hulls, a cockpit shell is suspended, attached to the arms.
Right now we are working with two options - either a steel truss beam or a composite beam with a more custom shape.
We imagine the loads on the beams will be quite high, but it has recently been pointed out to us, that many bigger boats with sails etc. (ie. dragonfly tri) have rather small beams with hinged attachment- in this case we don't even have a sail, which should reduce some of the expected righting loads, but to be honest, I am a little unsure on how big forces we can expect from the boat being tossed around in bigger waves.
Another point is the rigidity - For a truss system i would be a very stiff connection, whereas with composite beam it could probably flex more?
Do any of you have suggestions for either beam type, shape, expected loads, or maybe you can give us a direction for how to approach verification of the beam design?
All help is appreciated.