Gene-Hull version for Catamaran

Discussion in 'Software' started by Dolfiman, Jan 10, 2019.

  1. Dolfiman
    Joined: Aug 2017
    Posts: 1,539
    Likes: 678, Points: 113
    Location: France

    Dolfiman Senior Member

    Following the kind interest of few users, I have developed a full version of Gene-Hull dedicated to the Catamaran configuration. Here attached is the spreadsheet application (ods. file that can be opened with either Open office or Libre office), the User guide and one example.

    By hoping this can be helpful for your early stage projects,
     

    Attached Files:

    Dejay and sailhawaii like this.
  2. Dolfiman
    Joined: Aug 2017
    Posts: 1,539
    Likes: 678, Points: 113
    Location: France

    Dolfiman Senior Member

    Thanks to remarks received from Users, here attached a slight revision 2,41 , with corrections concerning the output data provided in sections 5,1, 5,4, 5,5 and 5,6 (the data gather to favor a transfer to a 3D modeller), in particular adding the C9,5 data so to provide more data density in the bow zone and so avoiding that the splines of the 3D tools creates undulation.

    By hoping your projects can take advantage of this application,
     

    Attached Files:

  3. Dolfiman
    Joined: Aug 2017
    Posts: 1,539
    Likes: 678, Points: 113
    Location: France

    Dolfiman Senior Member

    Here is another slight revision (minor corrections in the computations for 6. "Hydrostatics of the heeled catamaran"), leading to the version 2,42 attached.
    I am also investigating about the drag components for such multihull in vew a future VPP sheet connected to Gene-Hull, here also attached is my progress regarding the residuary drag.
    By hoping your projects can take advantage of all that,
     

    Attached Files:

  4. Richard Woods
    Joined: Jun 2006
    Posts: 2,210
    Likes: 176, Points: 63, Legacy Rep: 1244
    Location: Back full time in the UK

    Richard Woods Woods Designs

    thank you for all your efforts, a lot of work!
     
  5. Dolfiman
    Joined: Aug 2017
    Posts: 1,539
    Likes: 678, Points: 113
    Location: France

    Dolfiman Senior Member

    Thank you Richard for this nice message, that really encourages me in this kind of development.

    Here is another light revision 2,43 >> minor corrections in « buttock lines »and « floatation lines with heel » computation, to avoid bugs in some cases. No change of the user interfaces, you have just to copy/paste your input in the new version.

    Also in complement for the residuary drag estimation detailed in my previous quote#3, here is the sources and the data behind the proposed figures (document in .ods and .pdf formats)
     

    Attached Files:

  6. fallguy
    Joined: Dec 2016
    Posts: 7,963
    Likes: 1,800, Points: 123, Legacy Rep: 10
    Location: usa

    fallguy Senior Member

    Super grateful for the work you did on my questions. Thanks!
     
  7. BenMac
    Joined: Sep 2019
    Posts: 1
    Likes: 0, Points: 1
    Location: New Zealand

    BenMac New Member

    Dolfiman, You have done an awesom amount of work on this. Ive played around with the spreadsheet for a whule, read part of the instructional pdf and winged the rest. My question is,c ould this be used for a power catamaran Hull deign? Ive tried to get the Hulls looking how I think it should, but The spread sheet doesnt seem to want to make the data for the CAD files. of course, I havent put that much work into yet, but thought I would ask if you think this could be used for making a power boat? Thanks Ben
     

  8. Dolfiman
    Joined: Aug 2017
    Posts: 1,539
    Likes: 678, Points: 113
    Location: France

    Dolfiman Senior Member

    Thanks for your interest and use of Gene-Hul.
    Yes, I think Gene-Hull as it is can be helpful for a power catamaran : for example, you can put very small values (like 0,01 ...) for the rudders, daggerboards, rig, sailplan and corresponding weight input. I will plan to do a version dedicated to motor catamaran.
    The geometrical output data are gathered in section 5. in the Gene-Hull sheet : 5.1 gives the offsets, i.e. the y,z for sections positioned at x. 5.4 gives the x,z of the keel line, 5.5 gives the x,y,z of the hard Chine line (if any) and of the sheer line. You can copy/paste these data to enter as input in your 3D software tool.
     
Loading...
Similar Threads
  1. Dolfiman
    Replies:
    0
    Views:
    1,803
  2. Dolfiman
    Replies:
    3
    Views:
    2,083
  3. Dolfiman
    Replies:
    3
    Views:
    3,337
  4. Dolfiman
    Replies:
    11
    Views:
    3,410
  5. Dolfiman
    Replies:
    5
    Views:
    2,066
  6. Dolfiman
    Replies:
    0
    Views:
    2,660
  7. PaulKIFH
    Replies:
    8
    Views:
    2,026
  8. Yves Pfister
    Replies:
    8
    Views:
    4,950
  9. Claudio Valerio Parboni
    Replies:
    0
    Views:
    1,712
  10. Dolfiman
    Replies:
    4
    Views:
    4,348
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.