Gen IV. Vs Gen V bolt on compatibility

Discussion in 'Gas Engines' started by Captain Joeb, Dec 15, 2018.

  1. Captain Joeb
    Joined: Dec 2018
    Posts: 1
    Likes: 0, Points: 1
    Location: North Carolina

    Captain Joeb New Member

    If anyone can give me some feed back on,
    Crusader gen IV block vs Gen V block. externals
    I'm most concerned with all the external bolt ons and their compatibility's from Gen V and going back onto the Gen IV rebuilt motor I have.
    IE. heat exchangers alternators starters transmissions cooling hoses intake carbs etc
    I have a completely blown up Crusader Gen V. 1993 closed loop fresh, the long block and heads are junk
    I also have 2 rebuilt Crusader 454 Gen IV's. 1989's raw water
    I going to put the Gen IV long block and heads that have been rebuilt into boat and try to bolt on as much of the Gen V bolt on parts onto the rebuilt Gen IV
    Is this possible ?

    Thanks anyone Capt Job
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.