Dimensions for Aluminium Hull, Frames, Stringers, Plating on 93 Feet Yacht

I am constructing in 3D CAD at the moment a 93 feet modern Sailing Yacht that
I plan to build the next 2 Years. All Naval calculations I have finished with the professional
help of a Naval Architect Student, so my Yacht swims straight, rig, weight, shearing forces etc. is calculated

What I am missing now is some real numbers that are very hard to extract from Lloyds
Regulations or Germanischer Lloyd. Also in all Aluminium Boat Building Books I can not find
a real answer.

So I need some hands on know-how from some people with Aluminium Hull Building Knowledge.

I am planning with the following dimensions with 5083 H111 Aluminium:

Frame Spacing: 800 mm
Frame Thickness: 8 mm
Frame Width on each Side of Hull: 150-200mm (is 150mm enough?)

Floor Plate Thickness: 10mm
Floor Plate Height: 300mm
Engine Mount Plate/Center Girder Thickness: 12mm

Hull Plating: 8mm
Deck Plating: 5mm

Stringers Thickness: 6mm

I hope to get some useable answers in this forum.

Thanks in Advance!!

Please excuse if English Terms are not appropriate, its a tough one finding the right translations
from German Ship Building to English.

 

Welcome to the forum. I hope you find in it what you are looking for.
If you use ISO 12215-5 or the Lloyd's Register SSC Regulations, I can help you.

 

I can not use ISO 12215-5 as this is only for Boats with a maximum length of 25 Metres. But Lloyd's Register SSC sounds promising. I do not have any documents on this. Look forward to your help!.

 

Yes, you are right. I did not realize the limitation in length.
It is normal to define several panels (bow, center and stern, for example) to study the bottom of the ship, and other panels in the other areas of the hull (side, deck, ....). These panels will be limited by the transverse and longitudinal reinforcements in each zone. All this, and the corresponding dimensions, must be defined in the plane of scantlings. If you send me that plan, I can do the calculations according to the SSC Rules of Lloyd's.