resin

  1. R

    Replace transom core

    My son bought a 16 foot fiberglass boat a few years ago. Don't know the brand or model. The transom core was soft so he is currently replacing the core. He has asked me to help. His friend who has done boat repairs told my son to remove the transom core from the inside, while leaving the...
  2. M

    Secret for wetting out 1708

    Have few years of experience fiberglassing but only recently tried using 1708 and have hard time wetting it out. I could probably completely wet out 10 layers of CSM plus 5 layers of 1700 in time it takes to wet out a single layer of 1708. Plus, I end up flooding it with really unreasonable...
  3. M

    Vinylester reacting with ISO/NPG gelcoat

    I’m encountering a few issues and would appreciate any guidance. After applying gelcoat in a mold and letting it cure until mildly tacky (about 4 hours), the vinylester resin appears to dissolve or disturb the gelcoat more than expected. I understand that vinylester chemically bonds with...
  4. SRQseaside

    New here - boat project

    This is my project boat. Yes it was a free boat .... so here it goes. Fiberglass "John Boat" 12' --- this discussion is JUST for the boat bottom side and Topsides from the gunwale down. Once I get this finished and turned back over that will be a diff project (Easier) My Plan is to grind...
  5. M

    Gluing bulkhead

    Hi all, I got a friends kayak for a demo day and saw that the bulkhead leaks (see attached image) from two places eventhough it looks that there is mat and resin there. What is the proper way to quick fix this? Is it going to work by sanding a little bit and simply put around the bulkhead on...
  6. E

    Resins help

    First let me apologize for the long backstory before my question. I retired from the Navy and my wife and I moved to the Philippines where we volunteer as missionaries. I am beginning the process of building a stitch and glue boat plan I purchased online. The person who made the plan is...
  7. C

    Transom lay up process advice

    Hi All, I am relatively new to glass work. Been reading a bit, but couldn't find exactly the info I am looking for. I am working to give new life to a 1979 Boston Whaler V-20. She has some wet foam in the lower keel area and transom was in bad shape. I know I am crazy, but I like a challenge...
  8. M

    Polyurethane resin repurpose

    Hey guys, I saw a thread regarding sterling products vs awlGrip in which jimbo1490 gave a detailed response. It inspired me to join and reach out to your collective minds. I am looking to stabilize carbonized sandstone, limestone and ironstone with resin/ protective sealer. I believe I am...
  9. B

    Resin absorption in Infusion mesh/Flow media

    Hi, The biggest issue we are facing in our yard is too much absorption of resin in the flow media. Its approximately 800 g/m2. Its increasing the cost. Anyone tried a cheaper way or alternative to the infusion mesh/flow media ? I also understand that when the gsm of the flow media change, the...
  10. P

    Can you mix brands of polyester resin?

    I just started laying up a project using Orca 200 polyester resin and realized I won't have enough resin to get as many layers as I need. Its Friday and my local Fiberlay shop is closed on the weekends so I can't get more of the Orca 200. There are a few boating shops open on the weekend (like...
  11. matiss311

    Composite Material web store Composite24

    We are offering quality epoxy, polyester resins and gelcoats for efficient pricing. Fiberglass Carbon fiber and tooling. Small amounts and full loaded trucks of resins for boat building industry. For corporate enquiry contact info@kompozitmateriali.lv Some of the most common products in our web...
  12. M

    Silk/glass

    I have an old 16' Canoe and hope to improve on it's strength when under a load of say, 525 lbs. If, the current hull is used as a core, what material(s) do I use to add the least weight?
  13. KSS Panel Development

    KSS Panel Development

    KD920 Port hull panels
  14. KSS Panel Development

    KSS Panel Development

    KD920 Port hull panels
  15. KSS Panel Development

    KSS Panel Development

    KD920 Port hull panels
  16. KSS Panel Development

    KSS Panel Development

    KD920 Port hull panels
  17. KSS Panel Development

    KSS Panel Development

    KD920 Port hull panels
  18. The three masted tallship brig "Mircea"

    The three masted tallship brig "Mircea"

    Navyal Academy School Ship
  19. Classic Camper&Nicholsons wooden racer restoration

    Classic Camper&Nicholsons wooden racer restoration

    The mahogany hatches were rebuilt ; coated in epoxy and ten coats Epifanes varnish.
  20. classic racer restoration

    classic racer restoration

    Hull was rebuilt and three layers cold molded veneer in west system added over the outer surface. Original framing was replaced by cold moulding framing.
Back
Top