fiber glass

  1. P

    Phoenix Equipment Company – Limited Time Equipment Promotion

    Phoenix Equipment Company is currently offering 25% off all new systems through July 17. The promotion includes our complete line of equipment, including: Chopper Systems Gelcoat Systems Wet-Out Systems Putty Ram Systems Polyurethane Systems Resin Spray Systems Custom Equipment Solutions And...
  2. SRQseaside

    New here - boat project

    This is my project boat. Yes it was a free boat .... so here it goes. Fiberglass "John Boat" 12' --- this discussion is JUST for the boat bottom side and Topsides from the gunwale down. Once I get this finished and turned back over that will be a diff project (Easier) My Plan is to grind...
  3. J

    Searching for vintage "JII" Johnson & Sons chopper gun

    Hello, I am looking for a "JII airless chopper gun". I have attached photos for reference. It doesn't need to be in working condition, nor do I need the entire system, just the gun pictured itself. It's important that the "Johnson" engraving is intact on the handle. Any help would be...
  4. G

    36’ Lowell designed Hull Mould For sale

    I have a 36’ hull mould for sale. The mould was made in Poland and has never had a hull produced from it. It has been stored outside but the tooling gelcoat is in excellent condition. It needs a final compound and wax and it is ready to go. looking to get $50k for it. Serious inquiries only...
  5. b0z0x

    Vaccum bagging a strip canoe

    Hello fellows, i m new to vaccuum bagging, and i want to improve my resin/fiber ratio to save weight on my next strip planked canoe. (see this thread) The usual way is to wet lay outside with the strips still on the stations mold. I try to figure out the right way to vaccuum bag the outside...
  6. J

    12ft Cat for Solar Splash Competition - first time tips needed

    Hello people with boat knowledge, I am building a 12ft electric outboard tunnel hull/catamaran for the college event Solar Splash. I plan on using xps foam and 6oz fiberglass with epoxy for the construction. It will go ~5mph for the endurance event and if the power is there over 30mph for the...
  7. matiss311

    Composite material web Shop

    Epoxy resin, Polyester resin, Vinylester resins small and large quantity. Gelcoats and Topcoats Lloyds verified specialised systems for corporate boat builders. Fiberglass reinforcements, Carbon fiber and other structural materials. Professional advice and fast delivery. EPOXY RESIN...
  8. H

    Looking for Kevlar hull repair service

    Hello All, I am looking for a contractor to repair a catamaran ferry fiberglass hull. The repair will be approximately 100 sq ft; the hulls are made of cross-linked PVC foam core and Kevlar fabric. The repairs to be done on-site in a yard in the New England area. Can you please recommend a...
  9. S

    Best hull material for 65ft trawler

    Im starting on an ambitious project to build a large trawler hull. I have the hull in mind, and I want to create the hull using aluminum tube as a frame, wrapped in fiberglass. I want to create a shaped hull surface in a 4ft x 4ft grid pattern of the square tubing in aluminum, and lay fiberglass...
  10. D

    37' Deltaga gillnet to prawn converstion

    Converting a 37 foot deltaga from a gillnet boat into a halibut, live cod and prawn boat.
  11. B

    haines hunter breeze 470 transom design

    I am new at DIY boating, I am thinking of renovating the transom of a 1999 Haines Hunter Breeze 470. over the years it has had some bits put on, taken off ,changed etc and the transom is looking tired and probably a little leaky. So I want to refresh it, replace timber and add a swim...
Back
Top