deck

I am mounting a self-contained A/C unit in the cabin of my new build. the cabin deck is essentially for the purpose of this 3/8" marine Douglas Fir Plywood with 1 layer of 1708/Epoxy resin. Vibration mounting feet are set on 3 layers of 1708/Epoxy resin. The vibration mounts allow for 1/4" holes...

Hello! I am undertaking a project of making a deck for a project macgregor 36 cat. the boat's beam is 20' total. that's about 17' of deck space that will span between two hulls. The over length will span 14'. I plan on using epoxy glass laminate with divy core. Here are some questions I hope...

Hello, I'm new to this forum and was hoping someone would be able to put my mind at rest / share their thoughts on the draining setup on my boat. I'm currently in the process of restoring a coastworker 17 I bought the boat from someone who had fitted a new deck/stringers/bulkheads but was in...

Hi, I'm interested in a set of molds for offshore center consoles and bay boats. Looking for a set where all sizes look similar and share style lines. Thanks!

I am in Satun for a refit - Wharram Tiki 38 and I am looking for wood to replace my decks. Anyone can point me to a place to get this there? Thanks! Patrick

Hello I was wondering if anyoune has ever removed a fiberglass top or deck and replaced with timber deck. I wanted to do this on an existing fiberglass boat. I only wanted to dobtjis for asthetic reasons. I guess you cut the top off and then add some frames for decking. I wonder if the...

I have some old Nacra 5.2 and a Tornado hulls that I would like to build a lighweight hard deck on. 8' x 8' and 10' x 10' roughly. Any suggestions or comments

Hello there, This is my first post and I’m sure it won’t be my last! Beginning this week I have begun the almighty task (well what is for me) of re-coring the deck of my Trident Warrior 40, due to years of water ingress/core rot from a poorly maintained teak deck by the previous owner. Ive...

Hi all, I have recently become part owner of an Orkney Speedliner (we think) 16ft which has currently got a slatted wooden deck installed which is built from cross members and wooden planks. Problem being it is rotten so needs replacing. The hull is fine so just a case of installing a new...

Hello everyone, Thanks for allowing me in your group. First, I know nothing about boats except they are expensive and fun to ride. But I felt like this is the place for help/suggest/recommend ideas. I have a project that I hope someone with their knowledge of buoyancy can help. I am building...

Just bought a 60's sailboat with a balsa cored deck. Most of the deck is sound, but i started digging out the few soft spots. Where the fiberglass skin is delaminated, the old balsa has basically been reduced to powder, obviously rotten. My issue is that as I keep digging, the core still seems...

Hello , what do You think, what is the best way to join hull with deck : lodz https://ibb.co/ghb4Nb . It should be solid,waterproof and easy to open in case of change electric components. Any ideas? Thanks for response.

View of the cockpit area when the deck was first fitted to the hull. The mass of the complete deck is just under 200 kg and features carbon skins and a foam core. Both deck skins were vacuum infused with epoxy resin.

Curing of the deck bond under vacuum. The collision bow area was laminated at the same time. The collision bow was laminated over a foam core which will dent during large collisions, absorb energy and allow easy repair.