boat

I'm an owner-builder putting together a private project and I'm looking for a small, experienced crew to do the metal work. What I'm after: - A lead fabricator plus two or three welders, or an established small shop willing to take on a single job - Marine-grade plate work, 5083 or 5086...

I’m thinking ide be better off choosing power source and then the drive train.Iwas going to go with a 1.8L naturally asperated with a surface drive speed prop and have the ability to move it up or down as needed I was thinking that ide like to put that in a 9 or10’vhull and locate the engine in...

7m thermoplastic boat #HDPE #Bateaux #HDPEBoats #Boats #bateaux #HDPEBoats #BoatDesign #BateauxPEHD #BarcaTermoplastica #BarcheInPlastica #BarcheInPolietilene #BarcheHDPE #BarcoDePlastico #BarcoDePolietileno #BarcosHDPE #BarcoTermoplastico #BarcosDePlastico #BarcosDePolietileno #BarcosPEAD #

7 m HDPE Polyethylene Boat – 300 hp Outboard designed and developed for construction in HDPE — High-Density Polyethylene. https://www.youtube.com/watch?v=6PpxNE5qCKU #HDPE #Bateaux #HDPEBoats #Boats #bateaux #HDPEBoats #BoatDesign #BateauxPEHD #BarcaTermoplastica #BarcheInPlastica #BarcheInPolieti

This model was created in Blender utilizing NURBS technology. Thanks to the free Surface Psycho add-on, it is now possible to generate high-quality NURBS models directly within Blender. Although it has a slight learning curve, the tool is highly versatile. Below, you will find a link to a forum...

looking for a 14ft flats boat mold along with all the materials you need to build the first skiff out of it. Send me what you have will trade for a drz110 dirtbike or send me the cash price

im looking for a free houseboat if anyone can help. with trailer would Albert awesome. im new to having any boat thanks

-Total lenght:4600 (mm) - Beam: 1856 (mm) - Thickness of the side/bottom: 3/3 (mm) - The waight of the boat without engine: *aluminium parts: 232,73 (kg) *aluminium profiles:35,33 (kg) - Transom height:508 (mm) - Deadrise at transom:7 (degree) - Fuel tank:25 (liters) - Max hull load: 3...

-Total lenght: 6252,10 (mm) - Beam: 2276,08 (mm) - Thickness of the side/bottom: 4/4 (mm) - The waight of the boat without engine: *aluminium parts: 673,90 (kg) *aluminium profiles: 22,19 (kg) - Transom height: 508 (mm) - Deadrise at transom: 17 (degree) - Fuel tank: 60 (liters) - Max hull...

Total lenght: 5589,24(mm) - Beam: 2272 (mm) - Thickness of the side/bottom:4/4 (mm) - The waight of the boat without engine:750 (kg) - Transom height:635 (mm) - Deadrise at transom:19 (degree) - Fuel tank:115 (liters) - Max hull load:450/5 people - Engine : 150 (HP) -Utilization aluminium...

Total lenght: 6235,75 (mm) - Beam: 2200 (mm) - Thickness of the side/bottom: 4/4 (mm) - The waight of the boat without engine: *aluminium parts: 624,44 (kg) *aluminium profiles:23,99 (kg) - Transom height: 508 (mm) - Deadrise at transom: 16 (degree) - Fuel tank: 60-80 (liters) - Max...

- Lenght (hull/boat): 5356,27/5405,90 (mm) - Beam (hull/boat): 2324.07/2400.78 (mm) - Thickness: 3/4 (mm) - The waight of the boat without engine: *aluminium parts: 416.27 (kg) *aluminium profiles: 50.11 (kg) - Transom height: 550 (mm) - Deadrise at transom: 17 (degree) - Fuel tank...

- Total lenght (hull /whole boat):4700/5106.58 (mm), - Beam (hull/whole boat): 2100/2190 (mm), - Thickness of the side/bottom: 3/3 (mm), - The weight of the boat without engine: *aluminium parts: 356.78 (kg), *aluminium profiles: 32.16 (kg), - Transom height: 508 (mm), - Deadrise at...

Hello, I am currently trying to export this canoe design I have from delftship into Solidworks for a project. However, I only have the free version of delftship and I don't think it'll let me save it in the correct file type. I believe I need a STEP or IGES file. Would anyone be willing to use...

Hello all! Recently I've been getting into boat design and attempting to learn the softwares. Currently, I'm attempting to create a canoe that balances its straightline speed and its maneuverability. The canoe currently has a teardrop shape with a shallow arch keel that becomes shallower towards...

44' Ferro Cement Sampson boat available With Survey and designs Email for details Seiko321hbh@yahoo.com

Hey mate, currently i working on a personal project about effect of chine with seakeeping performance. The boat that i gonna modified was the NPL hull, which are the experiment hull. but in the paper didn't give a LCG data. so how can i calculate the radius gyration of ship when there is no an...

Hull-Console-Leaning Post-Tackle Center & Hardtop Molds for sale. Plus, patterns and templates for assembly. All excellent condition. Fully Operational complete boat available for sea trial and testing. Very unique hull design. Runs efficiently with minimal HP required. Ready for immediate sale.

Hello, I recently won an auction for this Almarine Dolphin 1200 OK boat, and my goal is to fully restore it. The biggest problem I'm facing at the moment is the paperwork. Unfortunately, the owners of this yacht have passed away, and some of the documents are missing. I am happy to say that I...

Hi, Could you please tell me how clear boats are constructed? How are the polycarbonate sheets connected to each other? Is it flex glue? Could you please also share insights about how much load the glue can sustain? In practice I see the hull thickness is 25 mm. In the second picture I see...