Sorry, I have no ideas.
Try searching FRANCIS F KINNEY drew many when with a well know Yacht designer thin was S and S WoodenBoat...
if you google the registration, you will find any current MFV in UK,SCOTLAND, IRELAND
some said why cut when design is not final, well it was only stem and that did not change, this is final dwg
[ATTACH] ok, lowered sheerline settled on above deck layout[ATTACH]
modifying hull. take deivery 5 tonne forklift tomorrow manitou mc 50,heavy plate on the boat, had a fire in shop, lost all my glue and got fairly...
here is the set up showing stretching anvil driven, the dring whhel I have not made yet[ATTACH]
soft roller forms the plate across the plate, it is used by me , never seen it elsewhere ,stops leaving plate with marks, it has it,s limits...
Nieland shipbuilding press - The best partner for cold forming technology https://www.nieland.com/ hear at the start you will see the plate being...
i have not drawn the driving wheel, it will be 350mm dia. with a contact of just 8mm, it crushes the plaste between it and the parrellel hard...
you make me smile i have built one 100 vessels with compound hulls see the solid cyl roller it is driven buy a solid wheel with an 8mm face...
stretching and forming wheels[ATTACH]
and making adjusting screw for the vee block[ATTACH]
yes Alu these wheels are cos I need if i flare topsides plates if you Force plates into framing, you'll get weld local distortion eh
I a wanted to share this, I bought 500kg steel 6mm plate 250mpa and a char lynn motor with 320 nm torque to drive the big wheel and have...