SolGato

I don’t have any direct experience with rotating rigs on boats in your size range, but as you mentioned some boats seem to require a...

Sorry, but I just don’t get it. IMO, the umbrella idea is ridiculously over complicated with way too many failure points. Around...

Drifter trimarans are designed by Mark Gumprecht. The Drifter 17 is a small trailable cabin trimaran for bay and river cruising etc. The...

I agree that the trampoline should be tension-able in all directions. It will add more rigidity and reduce stress on connections. For...

The grp honeycomb floor in place. A small wall from the same composite will be added in the front to keep water away, but open in the...

Mast finally stepped. It’s beginning to look like a tri.

New side walls are now in place and glued. We are really happy of the result and the inside space and arrangements.

Do you know how many of your boats are still out there being sailed and how they have held up? I think I remember seeing one for sale...

I think Skip was onto something with the Seawing 24, his first production molded boat. Mine was the last to be made and a bit of a hot...

Thanks Jamez. Pat McGrath (who ran Canadian multihull services and produced the original doco for the PDF above) married an Australian...

Hi folks, While rummaging through some old files I found the following which I think I got from a member called Oldsailor (hope your...

I missed that Tropostudio had offered links above to the reducers. For some reason the links do not open in my McMaster App, they just...

Not sure what your bolt size is, but this place has options for SS high misalignment rod end bushings...

I think a 10hp is about the max I would want, and like I mentioned before a 2-stroke would be advantageous on the older Classic low...

This is effectively what I was describing in option 3 of my post. This joint is oversized and accepts stepped stand-off sleeves that...