And pl takes paint well.
Use loctite pl premium polyurethane construction adhesive. Mix in some sawdust to seal all holes and seams. Skim coat couple coats on whole hull...
Regarding the electric wire black rubber oval bushing, do not remove it from the motor housing, just grease the wires with the silicone grease and...
China 2000 bilge pump from Amazon is actually a decent pump. It too failed as the shaft rusted at the rubber shaft seal, let in water. the rubber...
The Rule 3700 had failed as bilge water got inside. The pump housing cracked on top. Used Loctite marine epoxy. And I repaired a brush lead. I...
Here is the last one I fixed, a Rule 2000. The rubber seals failed, they wore out and let in bilge water. Cleaned it and painted the inside too....
Updating, engine is running good again. the fuel pressure tester got maxed out by the stop peg on the gauge So it was at least 7psi. I have read...
It runs! Put new correct rotation starter on, First start test video https://photos.app.goo.gl/UWZQuGygHKDeJtU98
Handy reference chart His engines have starter mount , lower right picture [ATTACH] ARCO Marine Catalog (marineengine.com)
That makes no difference right now. It has a CCW starter on there and it is spinning the wrong way. If I am standing behind the motor looking at...
It is GM 350 engine, oil pump can not spin CCW, that is definitive, it is not compatible with life for an engine to have no oil pressure.
He was totally lost and still is in a way about his engine. His engine broke couple months ago. And it takes a lot of time to figure out what...
Yes, marina parts guy sold him the wrong rotation starter. I have a couple other threads on boat forums going about this. It was a re-learning...
inboards. yes firing order tells that, but it is not noted anywhere on the motor. From what I have been reading one uses gear driven camshaft,...