Thank you. the measurements I posted…. Did I use the wrong abbreviations for millimeter as mm? The strakes are not at the widest part of the...
I am looking to add a hydrofoil which would allow this boat to reach 50+ knots
no, this boat does not have hydrofoils. Yes it will do 40 kn. Some say that that is crazy speed for a pontoon or tritoon, but these are not the...
Weight is the same. Speed difference from before is -3mpg. Went from 50mph to 47mph. I have not checked to make sure of the squareness of the...
This boat did 44knots before the accident. I’ve been trying to find out why it hasn’t since, although lazily. We cruise around 20 knots and pull...
outside pontoons are 25' and the center pontoon is just over 26'
Messabout, that's the way I see it as well. I am running 4oknots at WOT, trying to hit 44konts +. I feel this is hindering my efforts. Is there a...
My tritoon had an accident in where the center toon needed to be replaced. It was done so at the factory. Never felt that the boat was the same...
It’s an Asian brand. been out for a while but mainly smaller outboards.
After fairing it will be painted and non skid paint.
Fallguy, thanks for the education. I’ve followed some of your build and comments on the seasled builds. I’ve read that with 1708 it’s best to...
I thought the 1708 was 17oz biax and the 08 =3/4oz mat. my plan was mat down on the first and mat up on the second layer to prevent print...
The rotten core is plywood. Easy enough to remove and replace. The section that slopes from the cabin top to the front deck is not cored. The...
The interior of this boat has fiberglass ceiling liner. So no access to the bottom of the deck unless I cut through the liner and that's not a...
