DogCavalry

Let’s just delete the “I” from “AI”!

This is an interesting topic, but need a more detailed SOR to start discussion. A catamaran with an extendable /retractable center...

You need to do your drivetrain calculations first, to determine what the propeller diameter needs to be and start planning from there. I...

God I hope not. I really don't think there are 15 million to 55 million Naval Architects out there to starve to death...

A huge number of computational methods suddenly become more reliable. But that doesn't necessarily mean a Great Leap Forward (tm) for...

Was this a bot?

or simply over do the epoxy/resin at the apex...and then grind it sharp afterwards.

Your profile on the left will throw water into the air and with wind in your face will end up on the windshield/deck etc Also this...

You also can run a circ pump off the xtra power from the alternator... Johnson Pump Cm90 Circulation Pump - 23.7gpm - 12v - 1- 1/2"...

Buehler? Buehler?

Certainly. I suggest starting a dedicated thread for your design/build. I will help as much as possible. And when you have posted...

He asked the question, then left. Fairly common really.

I would do three things: 1. Compare datasheet values from the unknown epoxy to a known epoxy. It is best if the epoxies were tested to...

Yeah, the salvage is easy, The vessel on the other hand is most likely a total write-off by the insurers (barring a bad investigation...

In both your posts no 11 and 26 you mention the impeller in the context about I/O drive removal and service. For the uninformed reader I...