Ad Hoc

This is what I mean: So, If you have a closed deck, like the upper image...what VCG did you use?...and where are the down-flooding...

As noted above. The model "thinks" there is a deck, which clearly there isn't. Thus you need to define the internal shape of the hull...

Well...no. Your boat has an open cockpit (no deck is shown)...ie..water will flooded it once the gunwhales are immersed. From around...

Just a side note. I don't see too many passenger safety features for the large number of persons you show on the boat. What rules are...

Paper sent by DM.

It is working well, but for the splash rail matter. Those are ready for paints and the terrifying bonding challenge. Once completed...

Yup that's what we found with our fast ferry designs and tank testing to get the "sweet spot" over a nominal range.

Hi Barry, First, since fluids cannot transfer tension, you should not use “negative pressure”; it often causes misinterpretations. You...

It was a combo of several issues really. You needed volume to correct the trim, static trim at rest. And that would concomitantly also...

That depends upon the arrangement of the rams, whether they are linear or axial rotation rams...which is related to the arrangement of...

Waterline length, not the beam.

Indeed!! Indeed. FYI ...the small dinghies i sailed in as a teenager, had merely 1 or 2 layers of CSM at most, and that was it. Not...

Oh...so what does this mean then? Sure sounds like it to me. So, again....if you have such negative thoughts/feelings/impression of...

So, easy to clear up then. If you think this is in error, please state so exactly and clearly where and what it should be. Otherwise...

Indeed...there is no other way to take than as noted. Except if one is wishing to belittle someone for no reason.