Akes 23
Akeswins

Akeswins: Akes 23

Render of Akes 23 L 6,75 m B 2,48 m Deadrise at transom 21 4 mm alloy Powered by 200 cv FB

Posted by: Akeswins - website: http://www.akesdesign.it

Akeswins, May 30, 2006
    • Rating:
      5/5,
      RANCHI OTTO
      Bottom thickness 4 mm?
      Which would be the estimated speed?
      It would be better to increase to 5mm the bottom?
      May 30, 2006
    • Akeswins
      Max speed is near 44 Knots with a 200 Optimax and a 21" pitch Revolution4 propeller.
      The 4mm thickness is enough for me because the hull has many reinforcements. Do you intend 5mm only for the bottom?
      ps the transom has 6mm thick
      May 31, 2006
    • RANCHI OTTO
      I can send to you ,only for information, the transom design approuved by B.V. of my NAJA 12 ASD, 12m length, 4 x 300hp, + 50 knots.

      The bottom t = 5mm
      The transom t = 8mm
      The transom shield for engine installation = 25mm
      May 31, 2006
    • Akeswins
      Those thickness are good for your 12 m boat, but in my opinion are too much for my 6.75m boat..
      Send me your transom designs, thanx, I'm interested.
      My email is akeswins@hotmail.com
      May 31, 2006
    There are no comments to display.
  • Category:
    Boatbuilding
    Uploaded By:
    Akeswins
    Date:
    May 30, 2006
    View Count:
    5,980
    Comment Count:
    4